October 2008

Quicker & better installations with
the Polyaire Diffusion Fitting (PDF)

Description

The Polyaire Diffusion Fitting is a one piece (blow moulded) fitting coated with closed cell foam insulation. The PDF is designed to split the airflow from the fan coil into 2, 3 or 4 separate ducts and allow ‘tuning’ of the flow from a central point. (this greatly reduces installation time).

The PDF also allows convenient fitment of motorized dampers and/or a Zone Control system with the main module attached to the PDF and motorized Dampers surrounding this. All components are in one place for ease of wiring and maintenance.

Product Features

• The outlets are clearly numbered in the moulding to prevent confusion.
• Inlet Dimension: 350 or 400mm diameter.
• Outlet Dimensions: 250 or 300mm diameter.
• The fitting is designed to be a 2, 3 or 4 outlet fitting and each outlet can be managed via a manual or electronic damper. The motors are compatible with Zonemaster VAV & UniPoint/MaxiPoint systems.
• Folded metal damper blades for extreme strength and pressure resistance.
• Duct fitting is via Duct Ties/Draw bands.
• The product must be pre-ordered. Contact your local branch
  

Product Benefits

• Saves considerable installation time.
• Fully insulated.
• Leak proof fitting.
• Allows quick tuning of system from a central point.
• Allows easy fitment of Zonemaster motorised damper systems.
• Decreases chance of duct blow off due to faulty taping of duct.
• Easier, quicker and more secure joining (with cable ties)
• Easier ongoing maintenance.