Brivis by Rinnai L66 Contour Series Evaporative Air Conditioner

The sleek Brivis Contour™ is one of the most advanced Evaporative Coolers in its class, by delivering volumes of refreshing cool air without the large profile of traditional coolers. Designed to consistently deliver clean air, the system’s pre-wet cycle allows for fresh water to enter the cooler and begin soaking the cooling pads before the fan starts.

You may also need

MDO-X 450 x 450 4-Way Outlet Plastic Clip Kit

4 Piece Evaporative Dropper Roof Flashing Tin

MDO-S Grilles Only

MDO-X 350 x 350 4-Way Outlet Metal Spring Clip Kit

Dektite Evaporative Roof Flashings

Aqua Seal Flashing Tin

MDO-X 300 x 300 4-Way Outlet Plastic Clip Kit

Airsock Adaptor Fabric Insert 4 Way

SKU: 430660

Plain Turn Out Evaporative Dropper 550SQ x 1200mm

SKU: 444212

Plain Turn Out Evaporative Dropper 550SQ x 1000mm

SKU: 444211

MDO-X 400 x 400 4-Way Outlet Metal Spring Clip Kit

Plastic 350 x 525 Neck Adaptor

MDO-X 450 x 450 4-Way Outlet Metal Spring Clip Kit

Firebreak Duct Plus 4 Zero

MDO-S 230 x 230 4-Way Outlet Plastic Clip Kit

The MDO-S is a ceiling diffuser which can direct air flow for complete control and comfort using unique adjustable air flow grilles. It is also crucial in the installation of an evaporative cooling system. It is made from high impact engineering grade plastic which will not chip, fade, corrode or discolour over time.

Firebreak Duct R1.2

MDO-S 300 x 300 4-Way Outlet Plastic Clip Kit

Plastic Straight Evaporative Drop X Kits 550 x 1150mm

Plastic 350 x 350 Neck Adaptor

MDO X Plastic Clip

SKU: 231064

Description

Slimline

Brivis Contour

AquaSave water management system cleans the water, reduces wastage and saves up to 45% on water consumption.
Large cooling capacity.
Quiet fan operation.
Motorised winter seal prevents drafts going into your home and heat escaping during winter.
Sloping base allows the cooler to sit lower on the roof.
Pre-wet cycle for clean air distribution.
Up to 130mm thick cooling pads.
Small water reservoirs, minimising water discharge when the unit is turned off.
When in standby, the cooler removes any stagnant water and sediment build up.
Outer case constructed from UV protected plastic.

Specifications

Nominal Motor Power (W)	950
Weight (kg)	75
Pad Area	Large
Pad Thickness	130mm
Height - Front (mm)	800
Height - Rear (mm)	480
Length (mm)	1100
Width (mm)	1100

Delivery and Returns

Deliveries

Options for delivery or pickup from your nearest branch. Freight costs calculated at Checkout.

Similar

Bonaire VSS55 Integra II Series Evaporative Air Conditioner

Brivis by Rinnai P56 Promina Series Evaporative Air Conditioner

The Brivis Promina™ incorporates functional technology including an AutoRefresh water management system which controls the amount of fresh water added to the unit. Once a pre-determined number of fill cycles have been completed, the cooler will automatically flush the entire tank and refill it with clean, fresh water. When cooling is no longer required, the system will automatically run the FreshStart operation removing stagnant water and sediment before starting up again.

Bonaire SVS1100 Silhouette Series Evaporative Air Conditioner

The Silhouette Premium has many of the features of the Silhouette Ultimate, utilising the same stylish cabinet design, Bonaire Humidity Management System, 120mm Filtercool® filter pads and advanced Bonaire Aerowing® fan. Silhouette Premium also comes with Bonaire PreCool® and Pad Clean functions.

Coolair CPQ 450 Series Evaporative Air Conditioner 8.0kW

Introducing the Coolair CPQ 450 Series Evaporative Air Conditioner, a pinnacle of cooling performance with robust power capacity. Designed for ultimate comfort, this system blends advanced technology with energy efficiency to redefine your cooling experience. The CPQ 450 Series boasts a sleek and contemporary design, fitting seamlessly into any living or working space.